48 x Input flex-channels Mono/Stereo (equivalent of 96 DSP channels) |
46 busses |
16 x flexi-busses Mono/Stereo (equivalent of 32 DSP busses), Stereo Master (2), Solo busses (2 stereo, 4 total), and 10 x 8 Matrix (8) |
10 x Control Groups |
|
1 x Compressor per channel and buss |
|
1 x Gate per channel and buss (switchable to ducker, or compressor with side chain access) |
16 x assignable 32 band Graphic Eqs |
|
8 x FX engines (reverbs, delays, w/modulation and enhancer) |
21 x assignable DiGiTuBes |
|
21 x assignable Multiband Compressors |
|
21 x assignable Dynamic EQ’s |
|
User definable Macros |
|
An extremely high power headphone amplifier with 1/4 inch and mini jack socket |
96kHz as standard |
|
24 mic/line inputs |
|
12 analogue outs |
|
2 AES/EBU I/O (mono) |
|
Word Clock I/O |
|
1 GPI and 1 GPO |
|
DVI out (for an external monitor) |
|
2 DMI Card slots (up to 64 I/O per slot) |
|
2 Ethernet connections for Networking |
|
2 x 24 segment master/solo meters |
|
Touch sensitive rotaries with integrated switch & HTL |
2 x multi-touch screens |
|
21 x touch sensitive moving faders |
|
4 x layers of banks of 10 faders |
|
Customisable bank and channel layout |
|
Snapshots |
|
Integrated USB2 Audio I/O interface for recording and playback of up to 48 channels |
Audio Specification |
|
|
Sample Rate 48kHz, 96kHz |
|
Processing Delay 2ms Typical @ 48k (48 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96kHz |
|
Internal Processing Up to 40-bit, Floating Point |
|
A>D & D>A 24-bit Converter Bit Depth |
|
Frequency Response +/- 0.6dB (20Hz – 20kHz) |
|
THD <0.05% @ Unity Gain, 10dB Input @ 1kHz |
|
Channel Separation Better Than 90dB (40Hz – 15kHz) |
|
Residual Output <90dBu Typical |
|
Noise (20Hz – 20kHz) |
|
Microphone Input Better Than -126dB Equivalent Noise |
|
Maximum Output Level +22dBu |
|
Maximum Input Level +22dBu |
Processing Channel Specification |
|
Input Channel |
|
Input Name |
User-Defined |
Channel Selection |
Mono / Stereo |
Input Routing |
Main Input |
Analogue Gain |
-20 to +60dB |
Phase |
Normal / Reverse |
Digital Trim |
40 to +40dB |
Delay |
0 – 682ms |
DiGiTuBe Drive |
0.01 – 50.0 |
Bias |
0 – 6 |
LPF |
20 – 20kHz, 24dB/Oct |
HPF |
20 – 20kHz, 24dB/Oct |
Insert A |
(Pre EQ/Dyn) On/Off |
Equalisation 4 Band EQ |
Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hishelf, Hi/Hishelf)
On/Off |
Freq |
20 – 20kHz |
Gain |
+/- 18dB |
Q |
0.1 -20 (Parametric) / 0.10-0.90 (Shelf) |
Dynamics 1 |
Single or 4 x Multiband (3-Band) |
Compressor |
On/Off |
Threshold |
-60 – 0dB |
Attack |
500us – 100ms |
Release |
5ms – 5s |
Ratio |
1:1 – 50:1 |
Gain |
0 to +40dB |
Hi Crossover |
20Hz – 20kHz |
Lo Crossover |
20Hz – 20kHz |
Knee |
Hard, Med, Soft |
Dynamics 2 |
On/Off |
Gate / Ducker Threshold |
-60 – 0dB |
Attack |
50us – 100ms |
Hold |
2ms – 2s |
Release |
5ms – 5s |
Range |
0 – 90dB |
Key |
Any Source |
Key Listen |
|
Freq/Width |
20 – 20kHz |
Compressor |
On/Off |
Threshold |
-60 – 0dB |
Attack |
500us – 100ms |
Release |
5ms – 5s |
Ratio |
1:1 – 50:1 |
Gain |
0 to +40dB |
Link |
Any Channel / Buss |
S/C Source |
Any Source |
S/C Listen |
On/Off |
S/C Filter Freq/Width |
20Hz – 20kHz |
Insert B |
(Post EQ/Dyn) On/Off |
Mute |
Channel Mute |
Solo |
Solo Buss 1 / Solo Buss 2 / Both, |
Channel Safe |
Socket Properties, Input Route, Mono/Stereo, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Aux, Group Assigns, Pan, Fade, Mute, Direct Outs, Full Safe |
Output |
Routing Buss, |
Insert A, Insert B, |
|
Direct |
Post-Fade |
Fader |
100mm Motorised Fader ∞ to +10dB |
Processing Channel Specification
Aux / Group / Matrix Output |
|
Name |
User-Defined |
Phase |
Normal / Reverse |
Digital Trim |
-40 to +40dB |
Delay |
0 – 682ms |
DiGiTuBe Drive |
0.01 – 50.0 Bias 0 – 6 |
LPF |
20 – 20kHz, 24dB / Oct |
HPF |
20 – 20kHz, 24dB / Oct |
Insert A |
(Pre EQ/Dyn) On/Off |
Equalisation 4 Band EQ |
Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hishelf, Hi/Hishelf)
On/Off |
Freq |
20 – 20kHz |
Gain |
+/- 18dB |
Q |
0.1 -20 (Parametric) / 0.10-0.90 (Shelf) |
Dynamics 1 |
Single or 4 x Multiband (3-band) |
Compressor |
On/Off |
Threshold |
-60 – 0dB |
Attack |
500us – 100ms |
Release |
5ms – 5s |
Ratio |
1:1 – 50:1 |
Gain |
0 to +40dB |
Hi Crossover |
20Hz – 20kHz |
Lo Crossover |
20Hz – 20kHz |
Knee |
Hard, Med, Soft |
Gate / Ducker Threshold |
-60 – 0dB |
Attack |
50us – 100ms |
Hold |
2ms – 2s |
Release |
5ms – 5s |
Range |
0 – 90dB |
Key |
Any Source |
Key Listen |
|
Freq/Width |
20 – 20kHz |
Compressor On/Off |
|
Threshold |
-60 – 0dB |
Attack |
500us – 100ms |
Release |
5ms – 5s |
Ratio |
1:1 – 50:1 |
Gain |
0 to +40dB |
Link |
Any Channel/Buss |
S/C Source |
Any source |
S/C Listen |
On/Off |
S/C Filter Freq/Width |
20Hz – 20kHz |
Insert B |
(Post EQ/Dyn) On/Off |
Mute |
Channel Mute |
Solo |
Solo Buss 1 / Solo Buss 2 / Both, |
Channel Safe |
Mono/Stereo, Bus Mode, Label, Filters, Trim, Delay, Tube, Insert A, EQ, Dyn1, Dyn2, Insert B, Group Assigns, Fade, Mute, Direct Outs, Full Safe |
Output Routing |
Outputs, Insert A, Insert B |
Fader |
100mm Motorised Fader ∞ to + 10dB |