LAB GRUPPEN D 40:4L เพาเวอร์แอมป์ 4 ช่อง 1000วัตต์ที่ 4โอมห์

186,180฿

LAB GRUPPEN D 40:4L เพาเวอร์แอมป์กำลังขยาย 4000 วัตต์ คลาส D 4 ชาแนล Lake Digital Signal Processing and Digital Audio Networking for Installation Applications

รายละเอียดเพิ่มเติม

LAB GRUPPEN D 40:4L

LAB GRUPPEN D 40:4L รวมกำลังไฟฟ้าที่ยืดหยุ่นได้ 4000 W เข้ากับ LAKE DSP, DANTE Digital Audio Networking และการตรวจสอบความสมบูรณ์ของระบบขั้นสูง ยังรวมเอาเทคโนโลยีขั้นเอาต์พุตที่ได้รับการขัดเกลาใหม่ เข้ากับคุณลักษณะฮาร์ดแวร์และซอฟต์แวร์ที่กำหนดเป้าหมายการติดตั้ง ซึ่งปรับการออกแบบและการกำหนดค่าระบบเครื่องขยายเสียงให้เหมาะสมที่สุด

คุณสมบัติ:

  • แอมพลิฟายเออร์ 4,000 วัตต์พร้อมช่องสัญญาณเอาต์พุตที่ยืดหยุ่น 4 ช่องและเอาต์พุตช่องสัญญาณสูงสุด 2,000 วัตต์
  • 4 x 800 วัตต์เป็น 2 โอห์ม, 4 x 1,000 วัตต์เป็น 2.67 โอห์ม, 4 x 1,000 วัตต์เป็น 4 โอห์ม, 4 x 1,000 วัตต์เป็น 8 โอห์ม, 4 x 700 วัตต์เป็น 16 โอห์ม, 4 x 500 วัตต์เป็น Hi-Z 25 V , 4 x 1,450 วัตต์ เป็น Hi-Z 70 V, 4 x 2,000 วัตต์ เป็น Hi-Z 100 V
  • สเตจเอาต์พุตคลาส D ของ IDEEA ที่ได้รับการพิสูจน์แล้วและเชื่อถือได้ พร้อมระบบขับตรง 70 และ 100 V แรงดันคงที่ รวมทั้งอิมพีแดนซ์ต่ำ
  • Under-Voltage Limiting (UVL) สำหรับการทำงานต่อเนื่องในช่วงที่แรงดันไฟเมนลดลงอย่างรุนแรง
  • การเฝ้าระวังออนบอร์ดโดยเฉพาะและการตรวจสอบโหลดสำหรับแอปพลิเคชันการแจ้งเตือนจำนวนมาก
  • อินพุตเสียงสำรองและการเฝ้าระวังระบบออนบอร์ดสำหรับระบบเตือนภัยด้วยเสียง
  • ซอฟต์แวร์ CAFE (การกำหนดค่าเครื่องขยายเสียงสำหรับสิ่งแวดล้อม) สำหรับการออกแบบ การวางแผนระบบ การวางแผนอุปกรณ์ การติดตั้ง และการว่าจ้าง
  • ควบคุมและตรวจสอบการผสานรวมกับระบบเมทริกซ์ของบุคคลที่สาม รวมถึง MediaMatrix* และ Q-Sys* ผ่านซอฟต์แวร์เชื่อมต่อเฉพาะ
  • ปุ่มปิดเสียงที่แผงด้านหน้าเฉพาะสำหรับช่องสัญญาณเครื่องขยายเสียงแต่ละช่องพร้อมไฟ LED สองสี
  • 4 ช่องอินพุตแบบอะนาล็อก “Lake Class” พร้อมการแยกกราวด์ Iso-Float เพื่อการกระจายเสียงที่เชื่อถือได้
  • 4 ช่องอินพุตของเสียงดิจิตอล AES/EBU (AES3) รองรับอัตราตัวอย่างมาตรฐานทั้งหมดสูงสุด 192 kHz พร้อมความละเอียด 24 บิต
สเปค

General

Processing / Network Lake / Dante
Number of amplifier channels 4
Total burst power all channels (share among channels with RPM) 4000 W

Max output power (all channels driven)1

2 ohms 800 W
2.67 ohms 1000 W
4 ohms 1000 W
8 ohms 1000 W
16 ohms 700 W
Hi-Z 25 V 500 W
Hi-Z 70 V 1000 W
Hi-Z 100 V 1000 W

Max output power single channel (all models)1

2 ohms 850 W
2.67 ohms 1150 W
4 ohms 1750 W
8 ohms 1350 W
16 ohms 700 W
Hi-Z 25 V 500 W
Hi-Z 70 V 1450 W
Hi-Z 100 V 2000 W

Amplifier output modules (all models, all channels)

Peak output voltage 150 Vpk
Max output Current 30 Apk
Rational Power Management (RPM) Share “Total burst power” of the product freely among channels. Any channel can scale up to the “single channel max power”
Default voltage limitation (can be lifted with RPM configuration) 145 Vpk
Protection features Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection

Amplifier platform

Inter Sample Voltage Peak Limiter (ISVPL) Configurable Peak voltage threshold and profile
Amplifier gain Digital configurable amplifier gain 22 – 44 dB
Dynamic range > 112 dB
Load impedance analysis Yes
Temperature control Temperature regulated fans (front-to-rear airflow) and show must go on limitation (ATL, PTL)
Internal Sample Rate / Data path 96 kHz / 32 bit floating point
Product propagation delay AES 96 kHz / analog input 1.61 / 1.68 ms

Lake processing

Loudspeaker processing Up to 4 modules of Classic/linear-phase/FIR crossover, EQ, delay, LimiterMax™ – peak and RMS limiters
System tuning Group control with Raised Cosine™ MESA EG™ asymmetric filters
Input redundancy / Matrix Automatic 4 level input redundancy / 4 input mixers
System integration Comprehensive 3rd party protocol over UDP Ethernet

Dante Audio Network

Dante I/O 8 x 8
Network topology / redundancy Flexible topology / Supports daisy-chained and Dual redundant networks
Sample Rates / Transport 48, 96 kHz / Uni + Multicast
Network latency 0.25, 0.5, 1.0, 2.0, 5.0 ms

AES Inputs

Inputs 4 AES inputs
Supported sample rates / resolution 44.1, 48, 88.2, 96, 176.4, 192 kHz / up to 24 bits
Sample rate conversion THD+N 20 Hz – 20 kHz unweighted 0.0000003

Analog Inputs

Inputs 4 high quality inputs with Iso-Float ground isolation
Maximum input / digital reference +26 dBu / +21 dBu
Sampling rate / Resolution 96 kHz / 24 bit
Input impedance balanced / unbalanced 20 / 10 kOhm
THD+N (typical at 1 kHz unweighted) 0.0000022
THD+N (typical at 20 Hz and 20 kHz unweighted) 0.0000033

Back panel Interface

Analog inputs 4 x Terminal block connectors analog input with +, – and ground
AES inputs 4 x Terminal block connectors analog input with +, – and ground
Output connectors 4 x 2 pole Terminal block connectors rated at 1000 V / 41 A (exceeding amplifier capacity) Can take up to 8 mm2 (8.2 AWG) cables
Ethernet Ports 2 x EtherCon RJ45 Lake Controller, Dante controller and/or DLM (3rd party protocol)
Detachable mains cord Detachable locking 3-pin IEC rated at 250 V / 16 A

Front-panel user interface

System status indication 3 x tri-color LED. FRAME, TEMP, PSU for device status indication
Channel status indication 3 x tri-color LED per channel. Status indication separated for channel LOAD, AMP, SIGNAL status
Mute Per channel touch button for MUTE control and tri-color LED for indication
Power Touch button for ON/STANDBY control and tri-color LED for power state indication
Select Touch button and LED for bidirectional device software select functionality

Mains Power

Nominal voltage 100 – 240 Volt AC 50 – 60 Hz
Operating voltage 70 – 265 V AC 45 – 66 Hz
Mains wall plug Selectable on order CEE 7/7 “Schuko” 230 V / 16 A, NEMA 5-15 125 V / 15 A, BS1363-A 250 V / 13 A, IA16A3 250 V / 16 A, AU/NZ 250 V / 10 A, JP 125 V / 15 A, CPCS-CCC 250 V / 10 A

Power supply features

Soft start / Inrush power Yes
Power factor correction > 0.98 for mains power > 300 W
Regulated switch mode power supply (R.SMPS) Yes
Breaker Emulation Limiter (BEL) Configurable current threshold and breaker profile
BEL max current threshold 15 A
Power Average Limiter (PAL) Yes
Under Voltage Limiter (UVL) Yes
Mains undervoltage and overvoltage protection and mains glitch tolerance Yes

Dimensions

Rack rail to rear panel W: 483 mm (19”), H: 44 mm (1 U), D: 425 mm (16.7”)
Overall depth front-rear support D: 463 mm

Weight

Weight 8.3 kg (18.3 lbs)

Finish

Finish Black painted steel chassis with grey painted steel front with detachable grille

Approvals

Approvals CE, ETL (ANSI/UL, CSA), PSE, RCM, BIS, CCC
ดาวน์โหลด

Data Sheet

เงื่อนไข
  • ขอสงวนสิทธิ์ในการเปลี่ยนแปลงข้อมูลสินค้า และราคาโดยไม่ต้องแจ้งให้ทราบล่วงหน้า
ข้อมูลเพิ่มเติม
Brand

LAB GRUPPEN

Shipping & Delivery
shop c

บริการจัดส่งสินค้า

สินค้าทุกรายการจัดส่งถึงมือคุณอย่างรวดเร็วพร้อมแพคสินค้าอย่างปลอดภัยตลอดการเดินทาง

จัดส่งฟรีเมื่อซื้อสินค้า 3,000 บาทขึ้นไป

หรือ รับสินค้าที่หน้าร้าน

  • เลือกชมสินค้าจริงได้ที่หน้าร้านของเรา
  • ทดลองสินค้าก่อนเลือกซื้อ
  • สินค้าทุกชิ้นมาพร้อมการรับประกัน