Inputs (Analog) |
1 x 3-pin block connector (active balanced)
|
Outputs (Analog) |
1 x 3-pin block connector (impedance balanced)
|
USB Connection |
1 x USB 2.0, Type-B
|
Dante Connection |
1 x RJ45
|
Channel Count: 4 inputs, 2 outputs |
Polarity |
Non-inverting, any input to any output
|
Power Requirements |
Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
|
Power Consumption |
6.5 W maximum
|
Application Control |
HTML5 browser based
|
Operating Temperature Range |
20 to 104°F (-6.7 to 40°C)
|
Storage Temperature Range |
20 to 165°F (-29 to 74°C)
|
Thermal Dissipation |
Maximum: 6.8 W (23.0 BTU/hr)
|
Typical: 6.0 W (20.8 BTU/hr) |
|
|
Frequency Response |
20 Hz to 20 kHz +1, -1.5 dB
|
Dante Audio Flows |
Sampling Rate: 24-bit/48 kHz
|
USB Audio |
16-, 24-bit/44.1, 48 kHz
|
Latency |
Does not include Dante latency
|
Analog to Analog: 0.98 ms |
Analog to Dante 0.39 ms |
Dante to Analog: 0.72 ms |
Dante to Dante: 0.14 ms |
Dynamic Range |
20 Hz to 20 kHz, A-weighted, typical
|
Analog to Dante: 113 dB |
Dante to Analog: 117 dB |
Equivalent Input Noise |
20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
|
Line: -86 dBV |
Aux: -98 dBV |
Total Harmonic Distortion (THD) |
<0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
|
Common Mode Rejection Ratio |
>70 dB, 150 Ohms balanced source @ 1 kHz
|
Impedance |
10.6 kOhms
|
Input Clipping Level |
Line: +27 dBV
|
Aux: +15 dBV |
Output Clip Level |
Line: +20 dBV
|
Aux: 0 dBV |
Mic: -26 dBV |
Digital Signal Processing (DSP) |
Per Channel: Equalizer (4-band Parametric, Analog and USB output channels only), Mute, Limiter, Gain (140 dB range)
|
System: Matrix mixer |
Networking |
Cat 5e or higher (shielded cable recommended)
|
Dimensions |
1.6 x 5.5 x 5.0″ (4 x 14 x 12.8 cm)
|
Weight |
1.5 lb (672 g)
|