AUDIO INPUTS |
|
|
Microphone Input |
|
|
Nominal Input Level |
-60dBV |
Equivalent to 80dBSPL at the MXC416/420 capsule when speaking at a 30cm distance. |
Maximum Input Level |
-1.5dBV |
1% THD+N measured at MXCWAPT Dante Output. Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB. Microphone transducer not included in measurement. |
Frequency Response |
20Hz – 20kHz (+0.5dB/-3dB) |
Measured at MXCWAPT Dante Output. -45dBFS input, Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB. Microphone transducer not included in frequency response measurement. |
Total Harmonic Distortion + Noise |
0.04%, typical |
Measured at MXCWAPT Dante Output. -6dBFS input, 1kHz, Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB, 22Hz – 22kHz BW. Microphone transducer not included in THD+N measurement. |
Dynamic Range |
112dB (A-weighted), 110dB (unweighted), typical |
Measured at MXCWAPT Dante Output. Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB, 22Hz – 22kHz BW. Microphone transducer not included in dynamic range measurement |
Preamplifi er Equivalent Input Noise |
-117dBV (A-weighted), typical |
22Hz – 22kHz BW |
Input Impedance |
26kΩ |
|
Confi guration |
Unbalanced |
|
AUDIO OUTPUTS |
|
|
Speaker Output |
|
|
Nominal Output Level |
72dBSPL at 0.5m |
Measured with an SPL meter using A-weighting and fast averaging |
Maximum Output Level |
89dBSPL at 0.5m |
3% THD+N |
Frequency Response |
220Hz – 15kHz (±10dB) |
Audio Injected at MXCWAPT Dante Input. -6dBFS input, MXCWAPT Dante Input Gain = 0dB, Speaker Gain = 6dB. Speaker transducer was included in frequency response measurement. |
Total Harmonic Distortion + Noise |
1%, typical |
Audio Injected at MXCWAPT Dante Input. -6dBFS input, 1kHz, MXCWAPT Dante Input Gain = 0dB, Speaker Gain = 6dB, 22Hz – 22kHz BW. Speaker transducer was included in THD+N measurement. |
Dynamic Range |
94dB (A-weighted), 91dB (unweighted), typical |
Audio Injected at MXCWAPT Dante Input. MXCWAPT Dante Input Gain = 0dB, Speaker Gain = 6dB, 22Hz – 22kHz BW. Speaker transducer was included in dynamic range measurement. |
Headphone Outputs |
|
|
Maximum Output Level |
2.1dBV |
1% THD+N. Audio Injected at MXCWAPT Dante Input. MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB. Headphone transducer not included in measurement. |
Frequency Response |
100Hz – 20kHz (+0.5dB/-3dB) |
Audio Injected at MXCWAPT Dante Input. -6dBFS input, MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB. Headphone transducer not included in frequency response measurement. |
Total Harmonic Distortion + Noise |
0.04%, typical |
Audio Injected at MXCWAPT Dante Input. -6dBFS input, 1kHz, MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB, 22Hz – 22kHz BW. Headphone transducer not included in THD+N measurement. |
Dynamic Range |
101dB (A-weighted), 99dB (unweighted), typical |
Audio Injected at MXCWAPT Dante Input. MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB, 22Hz – 22kHz BW. Headphone transducer not included in dynamic range measurement. |
Load Impedance |
>8Ω, typical |
Headphone outputs are protected against short circuits |
Confi guration |
Dual mono |
Will drive stereo and mono headphones |
Type |
TRRS 3.5mm Female Socket |
|
RF |
|
|
WLAN Standard |
IEEE 802.11a,g |
|
RF Frequency Bands |
2.4GHz ISM / 5GHz UNII |
|
Sensitivity |
-75dBm at 10%PER |
|
Output Power |
1mW (Low), 3mW (Medium), 6mW (High), 10mW (Maximum) |
Antenna Type |
Proprietary Internal Bi-level Dual-Band PIFA |
|
POWER |
|
|
Battery Type |
Shure SB930 |
|
Battery Connector |
Proprietary blade |
|
Battery Chemistry |
Lithium-Ion |
|
Battery Voltage |
3V – 4.2V |
|
Battery Capacity |
35Wh |
|
USB |
|
|
Input Voltage Range |
4.5V – 5.25V |
|
Power Consumption |
10W max |
|
USER INTERFACE |
|
|
Display Type |
Color TFT LCD with Capacitive Touch Screen |
|
Display Size |
4.3″ (109.2mm) |
|
Display Resolution |
480 x 272 (128ppi) |
|
MECHANICAL |
|
|
Dimensions |
70.2mm x 148mm x 257.5mm (2.8″ x 5.8″ x 10.1″) |
|
Weight |
1.21kg with battery, 1.025kg without battery |
|
Color |
Black |
|
Material |
Molded Plastic, Die Casted Aluminmum |
|
Mounting Type |
M4 hexagon bolt |
|
ENVIRONMENTAL |
|
|
Operating Temperature Range |
0°C (32°F) to 35°C (95°F) |
|
Charging Temperature Range |
0°C (32°F) to 33°C (91.4°F) |
|
Storage Temperature Range |
-20°C (-4°F) to 50°C (122°F) |
|
Relative Humidity |
<95% |
|