P10TE |
|
RF Output Power |
|
Selectable |
10, 50, 100 mW (regionally dependent) |
RF Output Impedance |
50 Ω (typical) |
Net Weight |
4.7 Kg (10.4 lb) |
Dimensions |
44 X 483 X 343 mm |
Power Requirement (RF on, 100 mW power mode, no audio) |
|
Input |
100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded) |
Output |
100-240V AC, 5A max, unswitched |
Audio Input |
|
Connector Type |
Combination XLR and 6.35 mm (1/4”) TRS |
Polarity |
|
XLR |
Non-inverting (pin 2 positive with respect to pin 3) |
6.35 mm (1/4”) TRS |
Tip positive with respect to ring |
Configuration |
Electronically balanced |
Impedance |
70.2 kΩ (actual) |
Nominal Input Level |
|
Switchable |
+4 dBu, –10 dBV |
Maximum Input Level |
+4 dBu: +29.2 dBu –10 dBV: +12.2 dBu |
Pin Assignments |
|
XLR |
1=ground, 2=hot, 3=cold |
6.35 mm (1/4”) TRS |
Tip=hot, Ring=cold, Sleeve=ground |
Phantom Power Protection |
Up to 60 V DC |
Audio Output |
|
Connector Type |
6.35 mm (1/4”) TRS |
Configuration |
Electronically balanced |
Impedance |
Connected directly to inputs |
|
|
P10R+ |
|
Tri-band RF Filtering |
–3 dB at 30.5 MHz from the center frequency of each band |
Active RF Gain Control |
31 dB (adjusts RF sensitivity to provide more RF dynamic range) |
RF Sensitivity (20 dB SINAD) |
2.2 μV |
Squelch Threshold |
22 dB SINAD (±3 dB), default setting |
Adjacent Channel Rejection |
>70 dB |
Intermodulation Attenuation |
>70 dB |
Blocking |
>80 dB |
Image Rejection |
>90 dB |
Audio Output Power (1kHz @ <1% distortion, peak power, @16Ω) |
100 mW per output |
Minimum Load Impedance |
4 Ω |
Output Impedance |
<1 Ω |
4-Band Parametric EQ |
|
Low Shelf Selectable Gain |
±2 dB, ±4 dB, ±6 dB @100 Hz |
Low Mid Selectable Gain |
±2 dB, ±4 dB, ±6 dB @160 Hz, 250 Hz, 400 Hz, 500 Hz, 630 Hz |
Selectable Q |
0.7, 1.4, 2.9, 5.0, 11.5 |
High Mid Selectable Gain |
±2 dB, ±4 dB, ±6 dB @1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz |
Selectable Q |
0.7, 1.4, 2.9, 5.0, 11.5 |
High Shelf Selectable Gain |
±2 dB, ±4 dB, ±6 dB @10 kHz |
Volume Limiter |
|
Selectable |
0 dB to -48 dB in 3 dB steps |
Volume Lock |
Limits volume adjustment knob. |
|
Selected value analogous to volume knob increment. |
Selectable |
0 dB to -70 dB |